$110.00
Thanks to the new Morningstar firmware that allows Resistor-Ladder switching, we’ve been able to shove all these switches into a single enclosure taking a single Omniport!
*MC6Pro not included
| Specially Designed For: Morningstar MC6 Pro | |
| Number Of Switches: 8 |
Thanks to the new Morningstar firmware that allows Resistor-Ladder switching, we've been able to shove all these switches into a single enclosure taking a single Omniport!
The right-side-jacks of your MC6Pro are still usable as we've notched out an area for you to either run cables out of, or tuck a CME Widi controller into!
*MC6Pro not included
| Weight | 24 oz |
|---|---|
| Dimensions | 5.5 x 10 x 1.95 (LxWxH, in Inches) |
| Number Of Switches | |
| Switch Type | |
| Specially Designed For | |
| Wiring Compatibility | Morningstar Resistor Ladder |
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
MC6 Pro CommandCenter - Compact U-Aux 8
Yes, the secondary 1/4" jack is the "expansion" jack to continue the Aux switch chain for the remaining 8 switches. What most customers have done is just picked up either our SideAux6 or Compact SideAux6, but we could definitely do a 6-switch unit: 4 on the top and 2 on the front-angled-edge. Whenever you're ready just submit a "Contact Us" form off our site so we can actually email/chat and share designs with you =)
The stwitch unit adds 1.45" (36.9mmm) to the front of your MC6Pro, and 1.46" (37.1mm) to each side.
Overall, it is 10" wide (255.5mm) and 5.4" deep (137mm).
Sturdy and well built.
The device fits my MC6 Pro perfectly, and after some support from Jason, I was able to calibrate the ladder resistor switches without a problem.
Works really well. Those with bigger feet or tight space on your board might want the 7 switch version for better switch spacing. But the unit is taller than most of my other pedals, and there’s some breathing room around it that I can aim at the external switches without much concern for hitting the mc6 switches by accident.